Array ( [0] => Array ( [title] => Home [href] => [localized_options] => Array ( ) [type] => 0 ) [1] => Array ( [path] => node/% [load_functions] => Array ( [1] => node_load ) [to_arg_functions] => [access_callback] => node_access [access_arguments] => a:2:{i:0;s:4:"view";i:1;i:1;} [page_callback] => node_page_view [page_arguments] => Array ( [0] => stdClass Object ( [nid] => 5185 [type] => page [language] => en [uid] => 8 [status] => 1 [created] => 1325769632 [changed] => 1366097003 [comment] => 0 [promote] => 0 [moderate] => 0 [sticky] => 0 [tnid] => 4902 [translate] => 0 [vid] => 5185 [revision_uid] => 9 [title] => Overview of main cutting shapes [body] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[log] => [revision_timestamp] => 1366097003 [format] => 0 [name] => hanne.machiels [picture] => [data] => a:2:{s:13:"form_build_id";s:48:"form-DP5acJq_n_pTTAgCdE1pkDjnucsZBGtBGW-7KLDKUV4";s:29:"taxonomy_image_disable_images";i:0;} [path] => overview-main-cutting-shapes [field_page_subtitle] => Array ( [0] => Array ( [value] => [safe] => [view] => ) ) [field_page_body_top] => Array ( [0] => Array ( [value] =>

 back button

The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range.
Remember: customisation is the norm at Cibo. 

The parameters, used as the basis for the division are :

Discs with perforations

 
shape
diameter
holescode
 81 6 SP11
 1158SP01
 125 8 SP02
125 8+1 SP12
1258+4+1 SP14
 1506 SP03
 1506+1 SP13
 150 8I SP04
 1508E SP10
 1508E+1 SP05
 150 8E+1+6 SP06
 150 8E+1+8I SP07
 1509 SP08
2008 SP09

Pre-perforated discs

Top
shapediametercode
 115/75 S131
 125/75 S133

Discs without perforations/centre holes

 Top
shape diameter code
  19 S001
 22 S002
 25 S003
 45 S004
 50 S005
 60 S006
 75 S007
 100 S100
 115 S104
 125 S105
 150 S106
 175 S114
 178 S118
 200 S200
 215 S209
 225 S204
 230 S205
 250 S206
 300 S300
 330 S330
 350 S306
 381 S311
 400 S400
 430 S415
 500 S500
 600 S600
770S770
810S810

Discs with centre holes

 Top
shapediametercentre hole
code
   95 10 S008
 100 10 S128
 100 15 S101
 100 30 S102
 105 6 S103
 115 10S107
 115 50 S129
 125 10 S109
 140 35 S122
 150 22 S108
 150 22,2 S127
 150 50 S126
 160 40 S110
 180 10 S130
 200 25 S203
 250 25 S207
 300 25 S302
 350 8 S303
 350 40 S304
 200 10 S201
  200 25+2 S202
 300 25+2 S307
  381 127 S305

Discs with centre holes and central slots

 Top
 shape diameter centre hole code
 150 10 S111
 178 8 S115
 178 14 S116
 115 22 S120
125 22 S121
 150 25 S112
 175 25 S113
 178 22 S117
 175 22 S119
 115 22 S123
 150 30 S124
 178 22 S125
 406 101 S401
[format] => 1 [safe] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[view] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

) ) [field_page_body_bottom] => Array ( [0] => Array ( [value] => [format] => [safe] => [view] => ) ) [field_cta_link] => Array ( [0] => Array ( [nid] => [safe] => Array ( ) [view] => ) ) [menu_node_items] => Array ( [14751] => stdClass Object ( [menu_name] => primary-links [mlid] => 14751 [plid] => 6791 [link_path] => node/5185 [router_path] => node/% [link_title] => Overview of main cutting shapes [options] => a:1:{s:8:"langcode";s:2:"en";} [module] => menu [hidden] => 0 [external] => 0 [has_children] => 0 [expanded] => 0 [weight] => 0 [depth] => 3 [customized] => 1 [p1] => 8344 [p2] => 6791 [p3] => 14751 [p4] => 0 [p5] => 0 [p6] => 0 [p7] => 0 [p8] => 0 [p9] => 0 [updated] => 0 ) ) [last_comment_timestamp] => 1325769632 [last_comment_name] => [comment_count] => 0 [taxonomy] => Array ( ) [locations] => Array ( ) [location] => Array ( ) [parent] => 0 [order_by] => 147 [nh_children_view] => 0 [nodewords] => Array ( [abstract] => Array ( [value] => ) [canonical] => Array ( [value] => ) [rights] => Array ( [value] => ) [description] => Array ( [value] => Cibo website ) [keywords] => Array ( [value] => Cibo ) [revisit-after] => Array ( [value] => 1 ) [robots] => Array ( [value] => Array ( [noarchive] => 0 [nofollow] => 0 [noindex] => 0 [noodp] => 0 [nosnippet] => 0 [noydir] => 0 ) [use_default] => 0 ) ) [build_mode] => 0 [readmore] => [content] => Array ( [field_page_subtitle] => Array ( [#type_name] => page [#context] => full [#field_name] => field_page_subtitle [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => -4 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_page_subtitle [#weight] => 0 [#theme] => text_formatter_default [#item] => Array ( [value] => [safe] => [#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => ) [#title] => [#description] => [#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_page_subtitle [#title] => Subtitle [#access] => 1 [#label_display] => hidden [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#printed] => 1 ) [#title] => [#description] => [#printed] => 1 ) [field_page_body_top] => Array ( [#type_name] => page [#context] => full [#field_name] => field_page_body_top [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => -2 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_page_body_top [#weight] => 0 [#theme] => text_formatter_default [#item] => Array ( [value] =>

 back button

The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range.
Remember: customisation is the norm at Cibo. 

The parameters, used as the basis for the division are :

Discs with perforations

 
shape
diameter
holescode
 81 6 SP11
 1158SP01
 125 8 SP02
125 8+1 SP12
1258+4+1 SP14
 1506 SP03
 1506+1 SP13
 150 8I SP04
 1508E SP10
 1508E+1 SP05
 150 8E+1+6 SP06
 150 8E+1+8I SP07
 1509 SP08
2008 SP09

Pre-perforated discs

Top
shapediametercode
 115/75 S131
 125/75 S133

Discs without perforations/centre holes

 Top
shape diameter code
  19 S001
 22 S002
 25 S003
 45 S004
 50 S005
 60 S006
 75 S007
 100 S100
 115 S104
 125 S105
 150 S106
 175 S114
 178 S118
 200 S200
 215 S209
 225 S204
 230 S205
 250 S206
 300 S300
 330 S330
 350 S306
 381 S311
 400 S400
 430 S415
 500 S500
 600 S600
770S770
810S810

Discs with centre holes

 Top
shapediametercentre hole
code
   95 10 S008
 100 10 S128
 100 15 S101
 100 30 S102
 105 6 S103
 115 10S107
 115 50 S129
 125 10 S109
 140 35 S122
 150 22 S108
 150 22,2 S127
 150 50 S126
 160 40 S110
 180 10 S130
 200 25 S203
 250 25 S207
 300 25 S302
 350 8 S303
 350 40 S304
 200 10 S201
  200 25+2 S202
 300 25+2 S307
  381 127 S305

Discs with centre holes and central slots

 Top
 shape diameter centre hole code
 150 10 S111
 178 8 S115
 178 14 S116
 115 22 S120
125 22 S121
 150 25 S112
 175 25 S113
 178 22 S117
 175 22 S119
 115 22 S123
 150 30 S124
 178 22 S125
 406 101 S401
[format] => 1 [safe] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

) [#title] => [#description] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_page_body_top [#title] => Body top [#access] => 1 [#label_display] => hidden [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [#title] => [#description] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [field_page_body_bottom] => Array ( [#type_name] => page [#context] => full [#field_name] => field_page_body_bottom [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => -1 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_page_body_bottom [#weight] => 0 [#theme] => text_formatter_default [#item] => Array ( [value] => [format] => [safe] => [#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => ) [#title] => [#description] => [#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_page_body_bottom [#title] => Body bottom [#access] => 1 [#label_display] => hidden [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#printed] => 1 ) [#title] => [#description] => [#printed] => 1 ) [#content_extra_fields] => Array ( [title] => Array ( [label] => Title [description] => Node module form. [weight] => -5 ) [revision_information] => Array ( [label] => Revision information [description] => Node module form. [weight] => 2 ) [author] => Array ( [label] => Authoring information [description] => Node module form. [weight] => 3 ) [options] => Array ( [label] => Publishing options [description] => Node module form. [weight] => 4 ) [comment_settings] => Array ( [label] => Comment settings [description] => Comment module form. [weight] => 5 ) [language] => Array ( [label] => Language [description] => Locale module form. [weight] => -3 ) [translation] => Array ( [label] => Translation settings [description] => Translation module form. [weight] => 8 ) [menu] => Array ( [label] => Menu settings [description] => Menu module form. [weight] => 1 ) [path] => Array ( [label] => Path settings [description] => Path module form. [weight] => 7 ) [xmlsitemap] => Array ( [label] => XML sitemap [description] => XML sitemap module form [weight] => 30 ) [nodewords] => Array ( [label] => Meta tags [description] => Meta tags fieldset. [weight] => 6 ) ) [body] => Array ( [#weight] => 0 [#value] => [#title] => [#description] => [#printed] => 1 ) [#pre_render] => Array ( [0] => content_alter_extra_weights ) [field_cta_link] => Array ( [#type_name] => page [#context] => full [#field_name] => field_cta_link [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => 0 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_cta_link [#weight] => 0 [#theme] => nodereference_formatter_default [#item] => Array ( [nid] => [safe] => Array ( ) [#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => ) [#title] => [#description] => [#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_cta_link [#title] => Call to action [#access] => 1 [#label_display] => above [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#printed] => 1 ) [#title] => [#description] => [#printed] => 1 ) [locations] => Array ( [#tree] => [#parents] => Array ( ) [#prefix] => [#suffix] => [#required] => [#attributes] => Array ( ) [#value] => [#weight] => 4 [#description] => [#type] => markup [#title] => [#printed] => 1 ) [#title] => [#description] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [links] => Array ( [node_translation_nl] => Array ( [title] => Nederlands [href] => node/4902 [language] => stdClass Object ( [language] => nl [name] => Dutch [native] => Nederlands [direction] => 0 [enabled] => 1 [plurals] => 2 [formula] => ($n!=1) [domain] => [prefix] => nl [weight] => 0 [javascript] => f6ec6e081be60143b8e13639b000524c ) [attributes] => Array ( [title] => Overzicht stansvormen schijven [class] => translation-link ) ) [node_translation_fr] => Array ( [title] => Français [href] => node/5274 [language] => stdClass Object ( [language] => fr [name] => French [native] => Français [direction] => 0 [enabled] => 1 [plurals] => 2 [formula] => ($n!=1) [domain] => [prefix] => fr [weight] => 2 [javascript] => e7dd75ed5d6f16268e5250da011388fb ) [attributes] => Array ( [title] => Aperçu des formes de découpe principales [class] => translation-link ) ) ) ) ) [fit] => 2 [number_parts] => 2 [tab_parent] => [tab_root] => node/% [title] => Overview of main cutting shapes [title_callback] => node_page_title [title_arguments] => a:1:{i:0;i:1;} [type] => 4 [block_callback] => [description] => [position] => [weight] => 0 [file] => [href] => node/5185 [options] => Array ( ) [access] => 1 [localized_options] => Array ( ) [map] => Array ( [0] => node [1] => stdClass Object ( [nid] => 5185 [type] => page [language] => en [uid] => 8 [status] => 1 [created] => 1325769632 [changed] => 1366097003 [comment] => 0 [promote] => 0 [moderate] => 0 [sticky] => 0 [tnid] => 4902 [translate] => 0 [vid] => 5185 [revision_uid] => 9 [title] => Overview of main cutting shapes [body] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[log] => [revision_timestamp] => 1366097003 [format] => 0 [name] => hanne.machiels [picture] => [data] => a:2:{s:13:"form_build_id";s:48:"form-DP5acJq_n_pTTAgCdE1pkDjnucsZBGtBGW-7KLDKUV4";s:29:"taxonomy_image_disable_images";i:0;} [path] => overview-main-cutting-shapes [field_page_subtitle] => Array ( [0] => Array ( [value] => [safe] => [view] => ) ) [field_page_body_top] => Array ( [0] => Array ( [value] =>

 back button

The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range.
Remember: customisation is the norm at Cibo. 

The parameters, used as the basis for the division are :

Discs with perforations

 
shape
diameter
holescode
 81 6 SP11
 1158SP01
 125 8 SP02
125 8+1 SP12
1258+4+1 SP14
 1506 SP03
 1506+1 SP13
 150 8I SP04
 1508E SP10
 1508E+1 SP05
 150 8E+1+6 SP06
 150 8E+1+8I SP07
 1509 SP08
2008 SP09

Pre-perforated discs

Top
shapediametercode
 115/75 S131
 125/75 S133

Discs without perforations/centre holes

 Top
shape diameter code
  19 S001
 22 S002
 25 S003
 45 S004
 50 S005
 60 S006
 75 S007
 100 S100
 115 S104
 125 S105
 150 S106
 175 S114
 178 S118
 200 S200
 215 S209
 225 S204
 230 S205
 250 S206
 300 S300
 330 S330
 350 S306
 381 S311
 400 S400
 430 S415
 500 S500
 600 S600
770S770
810S810

Discs with centre holes

 Top
shapediametercentre hole
code
   95 10 S008
 100 10 S128
 100 15 S101
 100 30 S102
 105 6 S103
 115 10S107
 115 50 S129
 125 10 S109
 140 35 S122
 150 22 S108
 150 22,2 S127
 150 50 S126
 160 40 S110
 180 10 S130
 200 25 S203
 250 25 S207
 300 25 S302
 350 8 S303
 350 40 S304
 200 10 S201
  200 25+2 S202
 300 25+2 S307
  381 127 S305

Discs with centre holes and central slots

 Top
 shape diameter centre hole code
 150 10 S111
 178 8 S115
 178 14 S116
 115 22 S120
125 22 S121
 150 25 S112
 175 25 S113
 178 22 S117
 175 22 S119
 115 22 S123
 150 30 S124
 178 22 S125
 406 101 S401
[format] => 1 [safe] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[view] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

) ) [field_page_body_bottom] => Array ( [0] => Array ( [value] => [format] => [safe] => [view] => ) ) [field_cta_link] => Array ( [0] => Array ( [nid] => [safe] => Array ( ) [view] => ) ) [menu_node_items] => Array ( [14751] => stdClass Object ( [menu_name] => primary-links [mlid] => 14751 [plid] => 6791 [link_path] => node/5185 [router_path] => node/% [link_title] => Overview of main cutting shapes [options] => a:1:{s:8:"langcode";s:2:"en";} [module] => menu [hidden] => 0 [external] => 0 [has_children] => 0 [expanded] => 0 [weight] => 0 [depth] => 3 [customized] => 1 [p1] => 8344 [p2] => 6791 [p3] => 14751 [p4] => 0 [p5] => 0 [p6] => 0 [p7] => 0 [p8] => 0 [p9] => 0 [updated] => 0 ) ) [last_comment_timestamp] => 1325769632 [last_comment_name] => [comment_count] => 0 [taxonomy] => Array ( ) [locations] => Array ( ) [location] => Array ( ) [parent] => 0 [order_by] => 147 [nh_children_view] => 0 [nodewords] => Array ( [abstract] => Array ( [value] => ) [canonical] => Array ( [value] => ) [rights] => Array ( [value] => ) [description] => Array ( [value] => Cibo website ) [keywords] => Array ( [value] => Cibo ) [revisit-after] => Array ( [value] => 1 ) [robots] => Array ( [value] => Array ( [noarchive] => 0 [nofollow] => 0 [noindex] => 0 [noodp] => 0 [nosnippet] => 0 [noydir] => 0 ) [use_default] => 0 ) ) [build_mode] => 0 [readmore] => [content] => Array ( [field_page_subtitle] => Array ( [#type_name] => page [#context] => full [#field_name] => field_page_subtitle [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => -4 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_page_subtitle [#weight] => 0 [#theme] => text_formatter_default [#item] => Array ( [value] => [safe] => [#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => ) [#title] => [#description] => [#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_page_subtitle [#title] => Subtitle [#access] => 1 [#label_display] => hidden [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#printed] => 1 ) [#title] => [#description] => [#printed] => 1 ) [field_page_body_top] => Array ( [#type_name] => page [#context] => full [#field_name] => field_page_body_top [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => -2 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_page_body_top [#weight] => 0 [#theme] => text_formatter_default [#item] => Array ( [value] =>

 back button

The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range.
Remember: customisation is the norm at Cibo. 

The parameters, used as the basis for the division are :

Discs with perforations

 
shape
diameter
holescode
 81 6 SP11
 1158SP01
 125 8 SP02
125 8+1 SP12
1258+4+1 SP14
 1506 SP03
 1506+1 SP13
 150 8I SP04
 1508E SP10
 1508E+1 SP05
 150 8E+1+6 SP06
 150 8E+1+8I SP07
 1509 SP08
2008 SP09

Pre-perforated discs

Top
shapediametercode
 115/75 S131
 125/75 S133

Discs without perforations/centre holes

 Top
shape diameter code
  19 S001
 22 S002
 25 S003
 45 S004
 50 S005
 60 S006
 75 S007
 100 S100
 115 S104
 125 S105
 150 S106
 175 S114
 178 S118
 200 S200
 215 S209
 225 S204
 230 S205
 250 S206
 300 S300
 330 S330
 350 S306
 381 S311
 400 S400
 430 S415
 500 S500
 600 S600
770S770
810S810

Discs with centre holes

 Top
shapediametercentre hole
code
   95 10 S008
 100 10 S128
 100 15 S101
 100 30 S102
 105 6 S103
 115 10S107
 115 50 S129
 125 10 S109
 140 35 S122
 150 22 S108
 150 22,2 S127
 150 50 S126
 160 40 S110
 180 10 S130
 200 25 S203
 250 25 S207
 300 25 S302
 350 8 S303
 350 40 S304
 200 10 S201
  200 25+2 S202
 300 25+2 S307
  381 127 S305

Discs with centre holes and central slots

 Top
 shape diameter centre hole code
 150 10 S111
 178 8 S115
 178 14 S116
 115 22 S120
125 22 S121
 150 25 S112
 175 25 S113
 178 22 S117
 175 22 S119
 115 22 S123
 150 30 S124
 178 22 S125
 406 101 S401
[format] => 1 [safe] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

) [#title] => [#description] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_page_body_top [#title] => Body top [#access] => 1 [#label_display] => hidden [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [#title] => [#description] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [field_page_body_bottom] => Array ( [#type_name] => page [#context] => full [#field_name] => field_page_body_bottom [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => -1 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_page_body_bottom [#weight] => 0 [#theme] => text_formatter_default [#item] => Array ( [value] => [format] => [safe] => [#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => ) [#title] => [#description] => [#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_page_body_bottom [#title] => Body bottom [#access] => 1 [#label_display] => hidden [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#printed] => 1 ) [#title] => [#description] => [#printed] => 1 ) [#content_extra_fields] => Array ( [title] => Array ( [label] => Title [description] => Node module form. [weight] => -5 ) [revision_information] => Array ( [label] => Revision information [description] => Node module form. [weight] => 2 ) [author] => Array ( [label] => Authoring information [description] => Node module form. [weight] => 3 ) [options] => Array ( [label] => Publishing options [description] => Node module form. [weight] => 4 ) [comment_settings] => Array ( [label] => Comment settings [description] => Comment module form. [weight] => 5 ) [language] => Array ( [label] => Language [description] => Locale module form. [weight] => -3 ) [translation] => Array ( [label] => Translation settings [description] => Translation module form. [weight] => 8 ) [menu] => Array ( [label] => Menu settings [description] => Menu module form. [weight] => 1 ) [path] => Array ( [label] => Path settings [description] => Path module form. [weight] => 7 ) [xmlsitemap] => Array ( [label] => XML sitemap [description] => XML sitemap module form [weight] => 30 ) [nodewords] => Array ( [label] => Meta tags [description] => Meta tags fieldset. [weight] => 6 ) ) [body] => Array ( [#weight] => 0 [#value] => [#title] => [#description] => [#printed] => 1 ) [#pre_render] => Array ( [0] => content_alter_extra_weights ) [field_cta_link] => Array ( [#type_name] => page [#context] => full [#field_name] => field_cta_link [#post_render] => Array ( [0] => content_field_wrapper_post_render ) [#weight] => 0 [field] => Array ( [#description] => [items] => Array ( [0] => Array ( [#formatter] => default [#node] => stdClass Object *RECURSION* [#type_name] => page [#field_name] => field_cta_link [#weight] => 0 [#theme] => nodereference_formatter_default [#item] => Array ( [nid] => [safe] => Array ( ) [#delta] => 0 ) [#title] => [#description] => [#theme_used] => 1 [#printed] => 1 [#type] => [#value] => [#prefix] => [#suffix] => ) [#title] => [#description] => [#printed] => 1 ) [#single] => 1 [#attributes] => Array ( ) [#required] => [#parents] => Array ( ) [#tree] => [#context] => full [#page] => 1 [#field_name] => field_cta_link [#title] => Call to action [#access] => 1 [#label_display] => above [#teaser] => [#node] => stdClass Object *RECURSION* [#type] => content_field [#printed] => 1 ) [#title] => [#description] => [#printed] => 1 ) [locations] => Array ( [#tree] => [#parents] => Array ( ) [#prefix] => [#suffix] => [#required] => [#attributes] => Array ( ) [#value] => [#weight] => 4 [#description] => [#type] => markup [#title] => [#printed] => 1 ) [#title] => [#description] => [#children] =>

 The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range. Remember: customisation is the norm at Cibo. The parameters, used as the basis for the division are :

Discs with perforations shapediameterholescode 81 6 SP11 1158SP01 125 8 SP02125 8+1 SP121258+4+1 SP14 1506 SP03 1506+1 SP13 150 8I SP04 1508E SP10 1508E+1 SP05 150 8E+1+6 SP06 150 8E+1+8I SP07 1509 SP082008 SP09Pre-perforated discsTopshapediametercode 115/75 S131 125/75 S133Discs without perforations/centre holes Topshape diameter code  19 S001 22 S002 25 S003 45 S004 50 S005 60 S006 75 S007 100 S100 115 S104 125 S105 150 S106 175 S114 178 S118 200 S200 215 S209 225 S204 230 S205 250 S206 300 S300 330 S330 350 S306 381 S311 400 S400 430 S415 500 S500 600 S600770S770810S810Discs with centre holes Topshapediametercentre holecode   95 10 S008 100 10 S128 100 15 S101 100 30 S102 105 6 S103 115 10S107 115 50 S129 125 10 S109 140 35 S122 150 22 S108 150 22,2 S127 150 50 S126 160 40 S110 180 10 S130 200 25 S203 250 25 S207 300 25 S302 350 8 S303 350 40 S304 200 10 S201  200 25+2 S202 300 25+2 S307  381 127 S305Discs with centre holes and central slots Top shape diameter centre hole code 150 10 S111 178 8 S115 178 14 S116 115 22 S120125 22 S121 150 25 S112 175 25 S113 178 22 S117 175 22 S119 115 22 S123 150 30 S124 178 22 S125 406 101 S401

[#printed] => 1 ) [links] => Array ( [node_translation_nl] => Array ( [title] => Nederlands [href] => node/4902 [language] => stdClass Object ( [language] => nl [name] => Dutch [native] => Nederlands [direction] => 0 [enabled] => 1 [plurals] => 2 [formula] => ($n!=1) [domain] => [prefix] => nl [weight] => 0 [javascript] => f6ec6e081be60143b8e13639b000524c ) [attributes] => Array ( [title] => Overzicht stansvormen schijven [class] => translation-link ) ) [node_translation_fr] => Array ( [title] => Français [href] => node/5274 [language] => stdClass Object ( [language] => fr [name] => French [native] => Français [direction] => 0 [enabled] => 1 [plurals] => 2 [formula] => ($n!=1) [domain] => [prefix] => fr [weight] => 2 [javascript] => e7dd75ed5d6f16268e5250da011388fb ) [attributes] => Array ( [title] => Aperçu des formes de découpe principales [class] => translation-link ) ) ) ) ) ) )

Overview of main cutting shapes

 back button

The cutting shape of the discs varies, depending on the machine to which you want to attach the discs. Certain machines need a lot of holes punched into the abrasive discs, while others do not require any at all. Some of them have a diameter of 115 mm, others have a diameter of 600 mm. To simplify your selection, you will find on the following pages an overview of the main cutting forms that are part of Cibo’s standard range.
Remember: customisation is the norm at Cibo. 

The parameters, used as the basis for the division are :

Discs with perforations

 
shape
diameter
holescode
 81 6 SP11
 1158SP01
 125 8 SP02
125 8+1 SP12
1258+4+1 SP14
 1506 SP03
 1506+1 SP13
 150 8I SP04
 1508E SP10
 1508E+1 SP05
 150 8E+1+6 SP06
 150 8E+1+8I SP07
 1509 SP08
2008 SP09

Pre-perforated discs

Top
shapediametercode
 115/75 S131
 125/75 S133

Discs without perforations/centre holes

 Top
shape diameter code
  19 S001
 22 S002
 25 S003
 45 S004
 50 S005
 60 S006
 75 S007
 100 S100
 115 S104
 125 S105
 150 S106
 175 S114
 178 S118
 200 S200
 215 S209
 225 S204
 230 S205
 250 S206
 300 S300
 330 S330
 350 S306
 381 S311
 400 S400
 430 S415
 500 S500
 600 S600
770S770
810S810

Discs with centre holes

 Top
shapediametercentre hole
code
   95 10 S008
 100 10 S128
 100 15 S101
 100 30 S102
 105 6 S103
 115 10S107
 115 50 S129
 125 10 S109
 140 35 S122
 150 22 S108
 150 22,2 S127
 150 50 S126
 160 40 S110
 180 10 S130
 200 25 S203
 250 25 S207
 300 25 S302
 350 8 S303
 350 40 S304
 200 10 S201
  200 25+2 S202
 300 25+2 S307
  381 127 S305

Discs with centre holes and central slots

 Top
 shape diameter centre hole code
 150 10 S111
 178 8 S115
 178 14 S116
 115 22 S120
125 22 S121
 150 25 S112
 175 25 S113
 178 22 S117
 175 22 S119
 115 22 S123
 150 30 S124
 178 22 S125
 406 101 S401